Analog Output Integrated HMI PLC Controller 12DO 5 Inch TFT Display
Touch Panel Integrated HMI PLC Controller RS232 RS485 Analog Output Digital-I/O 12DO 5inch TFT Display
Model:EX3G-50KH-24MT-2DA-V-485P
-5inch touch screen
-12DI/12DO transistor
-2DA:2 analog output 0-10V
-one customized rs485 on PLC
-one default rs232 on PLC
Packing:
-1*5inch HMI/PLC all in one
-1*PLC programming cable
-1*HMI programming cable
-1*232 programming cable
Features:
1. Support interrupt,
2. linear arc interpolation,
3. PID auto-tuning.
4. 32K program capacity, 32K retentive register
Super functions:
PLC is compatible with FX3G, FX3U, FX3S. It operates fast.
Highly integration.
1. The digital points are 30 inputs and 30 outputs at most. The digital output can be transistor, relay or mixed output. Analog can reach up to 16 input and 8 output. It has 2 PLC COM port (RS232 and Mini B-type USB port), 1 downloading port and 1 USB port on HMI.
2. The PLC part of models 70KH, 100HA all-in-one can optionally select one 485 port or two 485 ports (one is changed from existed 232 port), CAN, network port (not coexist with the one on HMI), Wifi (will cover the existed 232 port). The HMI part can optionally select one RS232 or one RS485, and network port (not coexist with the one on PLC).
3. The PLC part of models 43HB, 43(50)KH can optionally select two RS485, and HMI part can select one RS232.
Support several high-speed counting and high-speed pulse.
1. Commonly high-speed conting is 6-channel single phase 60KHz or AB(Z)2-channel 60KHz plus 1 channel 10KHz.
2. High-speed pulse is commonly 8 channels, HB series Y0-Y7 10KHz per channel, Acceleration and deceleration are independent.
3. The total high-speed counting and pulse can not exceed 480KHz. 32K steps program capacity, 32K power-off retentive registers, support interrupt, linear and circular interpolation, PID self-adjusting.
Special encryption. Set password as 12345678 to thoroughly prevent reading data.(PLC only supports 8-bit password encryption)
PLC is compatible with Mitsubishi programming software, and HMI is Coolmay HMI programming software
| Model | EX3G-50KH-24M | EX3G-70KH | EX3G-100HA |
| Dimension | 150*93*32mm | 226*163*35.6mm | 275*194*36mm |
| Cutout size | 143*86mm | 218*153mm | 261*180mm |
| Power Consumption | 5-7W | 6-7W | 6-8W |
| Features | Support interrupt, linear arc interpolation, PID auto-tuning. 32K program capacity, 32K retentive register |
| HMI |
| Display | 60K colors touch panel; can be portrait display | 60K colors touch panel |
| Type | 5” TFT | 7” TFT | 10.1” TFT |
| Display size | 108*65mm | 154*87mm | 222*133mm |
| Resolution (pixels) | 800*480 | 70KH:800*480 | 1024*600 |
| RAM | 64MB | 128MB |
| ROM | 128MB |
| Operation system | WINCE 5.0 | WINCE 7.0 |
| CPU | ARM9 400MHz | CORTEX A8 720MHz-1GHz |
| Default | 1 download port,1 USB 2.0 port |
| Optional COM port | 1 RS232 port | 1 RS485 or 1RS232 port Ethernet port (can not coexist with PLC Ethernet port) |
| Audio | Optional |
| Software | CoolMayHMI HMI programming software |
| PLC |
| I/O level | Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact |
| I/O | 12DI/12DO | 12DI/12DO or 20DI/18DO or 24DI/20DO |
| DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM. | Relay (MR) or transistor (MT, Y0-Y3 are MOS) or mixed (MRT) MOS tube: 2A/point, 4A/4 points COM; MT: 0.5A/point, 0.8A/4 points COM, 1.6A/8 points COM; MR: 2A/point, 4A/4 points COM, 5A/12 points COM. |
| High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10 KHz |
| High-speed pulse | 8 channels,Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
| Default programming port | 1 Mini type B USB port, 1 Rs232 port (also can be used as COM port) | 1 Mini type B USB port, 1 Rs232 port (also can be used as COM port) |
| Optional | 1 Rs485 or 2 Rs485 COM ports (one is changed from the default Rs232 port) | 1 Rs485 or 2 Rs485 COM ports (one is changed from the default Rs232 port), CAN (2.0A/B), Ethernet port (can not coexist with HMI Ethernet port), WIFI (will occupy the default Rs232) |
| Analog I/O (optional) | Max 4AI/2AO | Max 16AI/8AO |
| AI type (optional) | Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple/ PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed | Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple/ PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/ 0~10V/ 0~5V/ -5V~5V/ -10V~10V/ 0~20mA/ 4~20mA/ mixed |
| AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed/ -5~5V/ -10~10V (2DA for 1 minus voltage) |
| Software | Compatible with GX Developer8.86 and GX WORKS 2 |
| Suggested models: EX3G-43HB/43KH/50KH/-24MT/24MR(-4AD2DA-485P/232H) / EX3G-70KH-24MR/44MT/MRT(-16AD8DA-485P/232H) EX3G-100HA-24MR/44MT/44MRT(-5AD2DA-485P/232H) Detailed info. refer to: EX3G HMI/PLC all in one programming manual EX3G HMI/PLC all in one user manual CoolmayHMI user manual |
Product Tags:
|
|
Analog Output Integrated HMI PLC Controller 12DO 5 Inch TFT Display Images
|
